Two holes near the front of the saddle of your old rocking horse are where pommels were once jitted. They are often missing removed, chewed by the dog, or just lost, but we can make authentic replacements for you!
Traditional style saddle pommels made from hard wood, covered with leather & decorated with small brass dome nails. For old horses which already have the pommel holes. You will need to cut holes through saddle skirts & flaps in order to insert the 3/4" diameter pegs.
How to Buy
Simply click on the 'Add to Shopping Basket' button. You will then be asked for any additional information that is required (colour, size etc.) before this item is added to your 'basket'. You may then either purchase the product immediately or continue adding further items to your shopping basket.
Pommels (per pair) Further information & Options
Before we can add this product to your shopping basket please confirm the following:
Measurements Required Measurements are needed for this product. Please measure your horse carefully using the guide below - either in inches or millimetres and enter your measurements in the boxes provided. Important note if you are unable to supply measurements now we will still take your order but before processing it will contact you for the required information.
Body Measurements
A Length of body measured straight along the side. (This measurement indicates the size of the horse; we need measurement (a) even if you are only ordering a bridle.)
B Are there metal staples fixed into the side ofthe horse from which to hang the stirrup leathers? If YES, how far apart are they? (If NO, we shall supply an alternative for hanging stirrup leathers.)
C Length of saddle top.
D Measurement across saddle block from side to side. (Leave out if your horse has no saddle block.)
E Girth, measured right round horse's belly.
Head Measurements
Pencil a mark at each side of the horse's head, slightly below and behind the base of the ears, as shown in the drawing. Call these marks XI and X2 and carefully measure as follows:
F X1 to comer of mouth.
G X1 to X2, measured under the throat.
H X1 to X2, measured over the top of the neck.
I X1 to X2, measured round the front of the head.
J Right round the nose, just above the nostrils.
K Width of mouth from side to side (for the bit). (The buckle-on bridles we usually supply are like small versions of real ones & and there is a fair amount of adjustment on the buckled straps.)
All done? Now just click on the 'Confirm & Add to Shopping Basket' button to add this item to your basket.
/images/product/pommels-(per-pair).jpg)
Head Measurements 
%2f&media=http%3a%2f%2fwww.rockinghorse.co.uk%2frocking-horse-accessories-and-tack%2fpommels-(per-pair)%2fimages%2flarge%2fpommels-(per-pair).jpg&description=Pommels+(per+pair)){kind=link}